Oil With PTFE

SYNCO CHEMICAL CORPORATION TYPICAL PROPERTIES SUPER LUBE® OIL W/PTFE

TEST	TEST METHOD	SUPER LUBE® OIL WITH PTFE
COLOR		Translucent White
TEMPERATURE RANGE		-45°F to 450°F (-43°C to 232°C) continuous -50°F to 500°F (-45°C to 260°C) intermittent
VISCOSITY cSt @ 100°C SUS @ 40°C	ASTM D445	18 1200
ISO GRADE		220
REPLACES ISO GRADES		150 - 320
REPLACES SAE GRADE GEAR OILS		90
VISCOSITY INDEX		145
SPECIFIC GRAVITY	ASTM D1298	.89
POUR POINT	ASTM D97	-30°F (-34°C) MAX
LBS/GALLON		7.4 @ 60°F
WATER, PPM	ASTM D1744	35 ppm
TAN	ASTM D974	0.04 maximum
FOUR BALL TEST	ASTM D2596 and D2783
LOAD WEAR INDEX		42 kg
WELD POINT		250 kg
FOUR BALL EP TEST Scar diameter	ASTM D 2266 and D4172	<0.5
SALT SPRAY TEST (100 hrs)	ASTM B117	pass
DIELECTRIC LOSS	ASTM D924	1.2 X 10¹²
DIELECTRIC RESISTIVITY	ASTM D1169	1.7 X 10¹⁴
DIELECTRIC CONSTANT	ASTM D924	2.5
EVAPORATION LOSS 22 hours @ 212°F(100°C)	ASTM D972	<2%
OXIDATION STABILITY, 100 hrs	ASTM D942 and D943	4 psi
TIMKEN OK LOAD	ASTM 2509 and 2782	40 lbs
FLASH POINT	ASTM D92	>428°F (220°C)
FIRE POINT	ASTM D92	>572°F (300°C)
COPPER CORROSION 24 hrs @ 100°C	ASTM D4048 and D130	1A
ACID NUMBER	ASTM D664	.5 mg KOH/g
SHELF LIFE		24 MONTHS

While this information contained herein is believed to be reliable, Synco Chemical Corporation makes no representation as to the reliability of the results or as to the results that the buyer or user will achieve.