|
|
High Temp/EP Grease
SYNCO CHEMICAL CORPORATION TYPICAL PROPERTIES SUPER LUBEŽ
HIGH TEMP/EP GREASE
|
| |
| |
|
TEST |
TEST METHOD |
SUPER LUBEŽ
HIGH TEMP/EP GREASE |
| NLGI GRADE |
ASTM D1092 |
2 |
| NLGI
CLASSIFICATION* |
ASTM D4950 |
GC-LB* |
| COLOR |
|
Translucent White |
TEMPERATURE
RANGE
|
|
-30°F
to 475°F
(-34°C to 246°C)
continuous
-30°F to +650°F (-34°C to 343°C)
intermittent |
| VISCOSITY (BASE
OIL)
cSt @ 100°C
SUS @ 40°C |
ASTM D445
|
8
350 |
| SPECIFIC
GRAVITY |
ASTM D1298 |
.89 @ 60° F |
| WATER, PPM |
ASTM D1744 |
35 ppm |
| TAN |
ASTM D974 |
0.04 maximum |
| DROPPING
POINT |
ASTM D2265 |
>500°F (260°C) |
| PENETRATION,
worked (60 Strokes) |
ASTM D217 |
265-295 mm/10 |
| FOUR
BALL TEST |
ASTM D2596 |
|
| LOAD
WEAR INDEX |
|
124.6
kg |
| WELD
POINT |
|
800
kg |
| FOUR BALL EP TEST
Scar diameter |
ASTM D 2266 |
<.5 |
| SALT SPRAY TEST
(100 hrs) |
ASTM B117 |
pass |
| DIELECTRIC
LOSS |
ASTM D924 |
1.2 X 1012 |
| DIELECTRIC
RESISTIVITY |
ASTM D1169 |
1.7 X 1014 |
| DIELECTRIC
CONSTANT |
ASTM D924 |
2.5 |
| OIL
SEPARATION |
ASTM
D6184 |
<2% |
| EVAPORATION LOSS
22 hours @ 212°F (100°C) |
ASTM D972 |
<1% |
| OXIDATION
STABILITY, 100 hrs |
ASTM D942 |
6.9 kPa |
| TIMKEN OK
LOAD |
ASTM 2509 |
50 lbs |
| FLASH POINT |
ASTM D92 |
>428°F (220°C) |
| FIRE POINT |
ASTM D92 |
>572°F (300°C) |
| WHEEL BEARING
LEAKAGE |
ASTM D1263 |
0.2 g |
|
WATER WASHOUT |
ASTM 1264 |
<3.0% |
| COPPER CORROSION
24 hrs @ 100°C |
ASTM D4048 and D130 |
1B, shiny |
| ACID NUMBER |
ASTM D664 |
.5 mg KOH/g |
| WARRANTY |
|
24 MONTHS |
|
|
*GC-LB-Wide temperature grease for use in components such as bearings, chassis
and universal joints in passenger cars, trucks, and other vehicles under mild and severe duty.
This includes vehicles operated under frequent stop-and-go
service (buses, taxis, urban police cars, etc.), or under severe braking service
(trailer towing, heavy
loading, mountain driving, etc.)
(see ASTM D4950).
While this information contained herein is believed to be
reliable, Synco Chemical Corporation makes
no representation as to the reliability of the results or as to the results
the buyer or user will achieve.
|
|
|
